The ST-2 Small Raspberry Pi 4 Tray is specifically designed just to work with the Pimoroni Aluminium case (PiMoroni Case). This is the smallest tray for a Raspberry Pi 4 case that we make and is great for when you need the tightest packaging.

Other cases may work with this specific tray, but they haven't been tested. See the images above for the PiMoroni case mounting point or ask us. Whilst we have tested that all the Raspberry PI 4 ports are available with the PiMoroni case, we cannot be sure other cases will work as well.

The ST-2 Small Raspberry Pi 4 Tray sits on top of the SP-8 Mounting Plate (sold separately), the SP-8 Mounting Plate then connects to any of our clamps. The ST-2 Small Raspberry Pi 4 Tray does not directly connect to either the SC-1 telescope Clamp or the ST-1 Tripod Clamp.

We supply 5mm longer bolts to replace the bolts supplied for the PiMoroni case, these go through the tray into the case. You do not need to modify or adapt the case in any way. The cases can then be put back to normal by using the original bolts.

If you are looking to buy this with the correct plates and telescope clamps as well as saving money, checkout our Bundle 2.

• ST-2 Small Raspberry Pi 4 Tray
• 4 x SB-7 bolts to mount the tray to the SP-2 Mounting Plate (sold separately)
• The correct length 4 x M2.5 bolts bolts for your case.
  

Whats not included

•  Raspberry Pi 4
  
•  Raspberry Pi 4 Case
•  SP-8 Mounting Plate
•  SC-1 Clamps or TC-1 Clamps

Dimensions

Length: 108mm
Width: 78mm
Height: 12mm

All of our mounting plates and trays are printed using high quality PETG, so you can use them in hot weather.