The ST-1 Raspberry Pi 4 Tray is specifically designed to work with four different Raspberry Pi 4 cases.

• The Pimoroni Aluminium case (PiMoroni Case)
  
• The Flirc Case (Flirc Case)
• The Argon Neo (Argon Neo Case). Please note you do not need to remove the rubber bumpers underneath the case to fit on the StarTray.
  
• A popular generic alumimium case (See here)
  

Other cases may work with this specific tray, but they haven't been tested. See the images above for the four case mounting point or ask us. It's likely that other cases will fit as the Raspberry Pi 4 has standard mounting holes.

The ST-1 Raspberry Pi 4 Tray sits on top of the SP-1 Mounting Plate sold separately, the SP-1 Mounting Plate then connects to any of our clamps. The ST-1 Raspberry Pi 4 Tray does not directly connect to either the SC-1 telescope Clamp or the ST-1 Tripod Clamp.

If you are looking to buy this with the correct plates and telescope clamps as well as saving money, checkout our Bundle 1.

• ST-1 Raspberry Pi 4 Tray
• 4 x SB-4 bolts to mount the tray to the SP-1 Mounting Plate (sold separately)
• The correct length 4 x M2.5 bolts or 4 x M3 bolts for your case. These are approx 5mm longer bolts replace the bolts supplied for the original case and go through the tray into the Raspberry Pi 4 case. You do not need to modify or adapt any of the Raspberry Pi 4 cases. The cases can then be put back to normal by using the original bolts.

Whats not included

•  Raspberry Pi 4
  
•  Raspberry Pi 4 Case
•  SP-1 Mounting Plate
•  SC-1 Clamps or TC-1 Clamps

Dimensions

Length: 108mm/4.2in
Width: 93mm/3.6in
Height: 12mm/0.4in

All of our mounting plates and trays are printed using high quality PETG, so you can use them in hot weather.